When picking out a jackshaft garage door opener a couple of years ago, I went out of my way not to get anything that has MyQ. Overhead Garage Door (the company) stocks what they refer to as Odyssey 2000, and it comes with an optional WiFi module, which I skipped. The opener is more than happy to just toggle open/close state if the contacts are momentarily bridged.
I paired it with Zen17, though in hindsight I could have just gone with an esp32 hidden right next to the motor.
Open/closed state is reported by a separate tilt sensor, which I might also swap for something else if only not to have to swap yet another battery
Chamberlain actively fights all attempts at third parties buildnig tools to control/monitor/use their garage door openers so they can sell subscriptions.
Giving them money in the first place is a horrible idea.
I wonder why they spend the effort. It seems like the people willing to pay and people willing to hack are different. With the hackers be a small group anyway
Same reason any other company lawyers up when a handful of nerds modify the hardware they bought and own - it gets some suity dude's nose out of joint.
They're asking for legislation to address their predatory practices about as hard as you can. If I buy a garage door opener I should own access to it without the bullshit.
Had to get a new garage door opener because the old one stopped working. Got a MyQ opener because it seemed like an excellent choice. Now my car wants me to pay for a subscription to open the door and the remotes that came with the damn thing have super-short range.
On top of that I live less than a mile from an airport directly in the descent path so there is basically 0 mobile service at my home. Often the MyQ app fails to function at all.
My old garage door opener got the damn thing open every time without issue. Would love to have it back.
I did the first one. AFAIK it doesn't quite work with all garage door openers because they started using special switches that don't just close the circuit.
Sometimes you get what the installer has in stock, I didn’t really “pick” Chamberlain, it’s just what the guy put in when I paid him to “fix my garage door”. For a lot of other people it’s just what comes with the house.
The correct answer is to just let your garage door opener be dumb, and buy a RatGDO, which works with any dumb opener including chamberlains: https://ratcloud.llc/
I like to think chamberlain sells their openers at a slightly lower price than they otherwise would, hoping to recover it on subscriptions. So by buying their opener plus a RatGDO, I’m hurting their bottom line just a tiny amount. It makes me feel good at least.
Unfortunately Chamberlain Security + 3.0 openers are not supported. If I ever need to replace my current garage door opener I will be looking for a non-Chamberlain product.
Unfortunately new chamberlains now come with Security 3.0, which is designed to lock out ratgdo and everything else, probably forever. So you’re kind of screwed if you’ve bought one recently.
I never understand the appeal of RatGDO. You can find other tools like Shelly 1 that can be easily integrated into your existing Zigbee/Matter ecosystem, or part of the Home Assistant via the HTTP interface, and they are much cheaper with proper UL certification.
You don’t have to buy the expensive official ratgdo device. The ratgdo software is free and you can build a small PCB for a few bucks plus the cost of the ESP32 and a couple of components. My house unfortunately came with MyQ openers so that’s what I’m doing.
there are no workarounds or options for their new security 3.0 models, you are just screwed. Their subscription or nothing. Just dont buy a Chamberlain/liftmaster.
Guess why this happened, to a brand with a previously stellar reputation? yep they got bought by PE.
I'm happy it's possible, but I'm not sure if I'm sufficiently happy to offset the fact that it's necessary.
This also makes me wonder why it's necessary. What requirement were they trying to solve for? Does lack of Internet connectivity mask some bigger problem with the firmware on the device periodically needing a restart?
Unfortunately new chamberlains now come with Security 3.0, which is designed to lock out ratgdo and everything else, probably forever. So you’re kind of screwed if you are getting one today
A bit of context that didn't make it into the writeup:
The 819LMB is a HomeKit based device, meaning by HomeKit spec it is supposed to function 100% locally on your LAN with zero internet access. (most connect it to home assistant)
In their infinite wisdom, Chamberlain decided to cripple it anyway: if the garage door opener cannot reach their cloud, a firmware watchdog triggers a hard reboot every 30 minutes, taking down local HomeKit control along with it. Additionally, if you don't block the internet the right way, it reboots every 10 minutes in addition to the 30 minute reboot.
There’s so little to these machines. Seems like an open source PCB to replace the proprietary would be feasible. Relays, limit switch inputs, obstruction sensors, current sensors, control input. Commodity stuff. I’m sure chamberlain is doing everything they can to make it seem more mystical than it is. Just to make number go up I suppose
very cool work. Clearly Chamberlain is very poor at writing software interfaces. I’ve witnessed duplicate closure commands that almost damaged my vehicle. There are many customers with damage due to MyQ on Reddit.
My g-d I hate the MyQ software with a passion. Nothing works on it consistently except for the ads they show. Two-factor auth? You're going to have to do it multiple times. Set your security preferences, they'll reset them at will. Notifications about the garage door being open, closed, etc.... More like we'll notify you about ads and things we want to sell.
I paired it with Zen17, though in hindsight I could have just gone with an esp32 hidden right next to the motor.
Open/closed state is reported by a separate tilt sensor, which I might also swap for something else if only not to have to swap yet another battery
Giving them money in the first place is a horrible idea.
Had to get a new garage door opener because the old one stopped working. Got a MyQ opener because it seemed like an excellent choice. Now my car wants me to pay for a subscription to open the door and the remotes that came with the damn thing have super-short range.
On top of that I live less than a mile from an airport directly in the descent path so there is basically 0 mobile service at my home. Often the MyQ app fails to function at all.
My old garage door opener got the damn thing open every time without issue. Would love to have it back.
https://www.meross.com/en-gc/mTerminal/smart-garage-door-ope...
The correct answer is to just let your garage door opener be dumb, and buy a RatGDO, which works with any dumb opener including chamberlains: https://ratcloud.llc/
I like to think chamberlain sells their openers at a slightly lower price than they otherwise would, hoping to recover it on subscriptions. So by buying their opener plus a RatGDO, I’m hurting their bottom line just a tiny amount. It makes me feel good at least.
https://ratcloud.llc/pages/frequently-asked-questions
Guess why this happened, to a brand with a previously stellar reputation? yep they got bought by PE.
One could just end up repacking the image with their own certificate chain, or patching out the reboot itself.
This also makes me wonder why it's necessary. What requirement were they trying to solve for? Does lack of Internet connectivity mask some bigger problem with the firmware on the device periodically needing a restart?
2. no internet connection means it’s not working properly
3. reboot usually fixes things
4. therefore, if no internet connection, we should reboot.
Of course 1 and 2 are the real issue, I wish device makers would design devices that treat internet connectivity as always optional.
Similar to media piracy, I've never seen a more motivated group of individuals to seize and automate.
Frankly it's lovely. You'll never beat passion like that.
The 819LMB is a HomeKit based device, meaning by HomeKit spec it is supposed to function 100% locally on your LAN with zero internet access. (most connect it to home assistant)
In their infinite wisdom, Chamberlain decided to cripple it anyway: if the garage door opener cannot reach their cloud, a firmware watchdog triggers a hard reboot every 30 minutes, taking down local HomeKit control along with it. Additionally, if you don't block the internet the right way, it reboots every 10 minutes in addition to the 30 minute reboot.
I now only use MyQ as a last resort.
God what fucking fuckwads